Kbron Roofing logo
Mon–Sat 6 AM–8 PM · Sun Closed Get Estimate

Stone-Coated Steel Roofing in San Antonio: Tile Look, Steel Roof

A tile profile in steel, for HOAs that want the look and homes that need the strength


Where the HOA requires a tile profile and the house cannot carry tile weight, the answer is a roof that looks like tile and weighs like steel. Stone-coated steel roofing is steel panels pressed into a tile profile and coated in stone granules, installed with the HOA approval in writing first. Call (254) 645-5833, Monday to Saturday, 6 AM to 8 PM.

Stone-coated steel roof tiles on a San Antonio home
San Antonio Roofer Roofing contractor in San Antonio, Texas
5.0 from 18 Google Reviews All 18 Google reviews are 5-star
Mon–Sat 6 AM–8 PM Call Monday to Saturday, 6 AM to 8 PM
Latino-Owned Identifies as Latino-owned and LGBTQ+ friendly

What Our Stone-Coated Steel Roofing Includes

Stone-coated steel is the tile look without the tile weight: steel panels pressed into a tile profile and coated in stone granules, so the roof looks like tile and performs like metal.

Tile-Profile Steel Panels

Tile-profile steel panels are cut and formed for the roof, so the profile matches the street and the panels sit on the battens the way tile would.

Full Tear-Off to Deck

The old roof comes off in full and is hauled away, down to the deck, because a steel roof over two old layers is not an installation at all.

High-Temperature Underlayment

High-temperature underlayment goes across the whole deck, because a steel roof in a 100-degree summer runs hotter than shingles and the underlayment has to take it.

Custom-Formed Flashing

Flashing is custom-formed in metal for every chimney, wall, valley and penetration, because a steel roof with shingle flashing is a roof that leaks at the transitions.

Balanced Ventilation

Balanced ventilation is part of the installation, so the attic breathes and the panels are not cooked from below.

Final Walk-Through and Photos

The final walk-through and photos close the job: the finished roof is walked with you, and the photos show the work, panel by panel.

What Stone-Coated Steel Roofing Really Involves


Stone-coated steel roofing really involves the approval first and the weight second. It is the premium tile-look alternative for HOAs that require a tile profile without the tile weight: steel panels in a tile profile, where concrete tile weighs 900 to 1,100 pounds per square and steel is far lighter. The panels are set to the tile profile, the flashing is custom-formed, and the HOA approval is got in writing, naming the exact product and colour, before the tear-off starts.

The reason most San Antonio homeowners choose it is the HOA. Where covenants require a tile look, stone-coated steel is the way to keep the profile without the weight or the underlayment clock of real tile. We check the HOA approval in writing before tear-off, naming the exact product and colour, because approval for a tile look is not approval for any steel roof. Compare real clay and concrete tile and standing-seam metal before you decide.

How Our Stone-Coated Steel Installation Works

How our stone-coated steel installation works: approval first, tear-off second, panels last, so the roof that goes on is the roof that was approved.

01

Schedule

Call (254) 645-5833 during hours and tell us the HOA's requirement and the age of the roof. We set a time to inspect, and the inspection covers the deck, the flashing and the ventilation.

02

Diagnose

We inspect every slope, photograph the wear and the flashing, and check the attic side of the deck, so the scope is written from the roof in front of us.

03

Fix

You get a written scope for the steel roof, naming the panel, the underlayment, the flashing work and the ventilation, so the decision is specific.

04

Finish

We tear off to the deck, rebuild in order, photograph each layer, sweep the yard, and walk the finished roof with you before we leave.

Tools and Methods We Use on Stone-Coated Steel Roofing Jobs

Tools & Equipment

Metal brake and shears

On a stone-coated steel job the metal brake and shears form the panels and the flashing to the roof, cutting and bending the steel so the tile profile fits instead of being forced.

Moisture meter

We use the moisture meter on every stone-coated steel visit, because a deck that looks dry from above can be damp underneath, and a damp deck is the failure that shows up next year.

Seaming tool

The seaming tool is how we check stone-coated steel work before it is covered up, so a soft spot or a missed clip is found while it can still be fixed.

Chalk line

On a stone-coated steel job the chalk line marks the panel layout and the cuts, so the tile profile runs straight and the courses fall where they should.

Safety harness and roofing ladder

We use the safety harness and roofing ladder on every stone-coated steel visit, because a steel roof is slicker than shingles and a rushed footing is how a good job turns into a bad day.

Extension ladder and roof brackets

The extension ladder and roof brackets are how we check stone-coated steel work before it is covered up, so the high eaves and the steep pitches are reached, not guessed at.

Methods & Standards

High-temperature underlayment first

For stone-coated steel roofing, high-temperature underlayment first is what keeps the roof dry through hail season and the next hot summer, because a steel roof runs hotter than shingles.

Panels set to the tile profile

We follow panels set to the tile profile on stone-coated steel work, because the profile is the point: the roof has to look like tile from the street.

Custom-formed metal flashing

Custom-formed metal flashing is the rule on every stone-coated steel job we do in San Antonio, not an upgrade and not an extra: the flashing is formed for the roof, not bought off a shelf.

HOA approval in writing first

For stone-coated steel roofing, HOA approval in writing first is what keeps the job straight, because the approval names the exact product and colour before the tear-off starts.

When Stone-Coated Steel Roofing Is the Right Call in San Antonio

01

Your HOA requires a tile look and your house cannot carry real tile weight.

What we do: We read the HOA's requirement with you, name the panel and the colour, and get the approval in writing before the tear-off, because a tile-look street expects a tile profile and the approval is the proof.

The homeowner gets a written scope for the stone-coated steel work, with photos of the roof and the approval named, so the next step is a decision, not a guess.

02

Your tile roof needs an underlayment renewal and you want a lighter option.

What we do: We lift the tile, check the underlayment, and measure the weight the house is carrying, because a tile roof that needs an underlayment renewal is the moment to ask whether the next roof should be lighter.

The roof is documented, the stone-coated steel work is scoped, and the homeowner decides with the evidence in hand rather than a guess.

03

Your shingle roof was bruised by hail and you want a steel roof that still looks like tile.

What we do: We mark and photograph the hail damage slope by slope, count the hits, and write a scope that names the damaged slopes, so the steel roof that replaces the shingles is scoped from the damage.

The homeowner keeps photos of the damage and a written scope for the stone-coated steel work, so the next step is a decision, not a guess.

04

You are building or adding on and the plans call for a tile profile.

What we do: We check the plans with you, confirm the tile profile the plans call for, and price the steel roof with the underlayment and the flashing in the open.

The stone-coated steel scope is written, the photos are in hand, and the homeowner can act on the roof with the evidence in front of them.

How Stone-Coated Steel Works in San Antonio

Stone-coated steel suits the city's tile-look neighbourhoods, from Stone Oak to The Dominion, where the HOA requires a tile profile and the house cannot carry tile weight.

Neighborhoods We Serve

  • Stone Oak

    In Stone Oak the stone-coated steel roofing work follows the neighbourhood: 1990s and newer streets, tile-heavy blocks, and HOA rules that name the material and the colour.

  • The Dominion

    The Dominion is one of the San Antonio neighbourhoods where stone-coated steel work is shaped by the houses themselves, with a guard-gated master-planned community where tile is the expected roof.

  • Encino Park

    Encino Park homes bring their own stone-coated steel pattern, with far-north streets along the Bulverde Road corridor, where architectural shingle and tile sit side by side.

  • Monte Vista

    In Monte Vista the stone-coated steel roofing work follows the neighbourhood: early-20th-century houses with steep, complex roofs under mature live oaks.

  • Westover Hills

    Westover Hills is one of the San Antonio neighbourhoods where stone-coated steel work is shaped by the houses themselves, with far-west master-planned streets where the roofs are newer and larger.

Local Conditions We Plan For

  • Spring hail season across Bexar County

    When we plan stone-coated steel roofing work, spring hail season across Bexar County is on the list from the first look, because about 85 percent of the large-hail reports fall in March through May.

  • Summer UV and 100-degree heat

    Summer UV and 100-degree heat shapes how stone-coated steel roofing work is done in this city: the panels reflect the heat instead of holding it, and the underlayment is rated for the temperature.

  • HOA rules requiring a tile look

    HOA rules requiring a tile look is part of every stone-coated steel job here, and the approval is got in writing, naming the exact product and colour, before the tear-off starts.

  • Tile weight and engineered structure

    When we plan stone-coated steel roofing work, tile weight and engineered structure is on the list from the first look, because concrete tile weighs 900 to 1,100 pounds per square and the house has to be built for it.

Tile Look in Stone Oak, Without the Tile Weight

Before

A 20-year-old concrete tile roof in Stone Oak with worn underlayment, leaks at two valleys, and tile that was sound everywhere else.

After

We removed the old tile, renewed the underlayment, and installed stone-coated steel in a tile profile, photographing each layer as it went on.

Maintenance: We recommend a spring inspection after hail season and checking the ridge and flashing after any storm that drops hail you can see on the ground.

Before

A The Dominion home with a house that cannot carry tile weight on a roof that had not been looked at in years, with a leak that showed up after every heavy rain.

After

We checked every slope, repaired the house that cannot carry tile weight at its source, and took photos of the finished work from the roof and the attic.

Maintenance: We recommend a stone coated steel roofing check each spring after hail season, and keeping valleys clear of oak leaves so water runs off instead of sitting.

Before

An Encino Park home where tile underlayment that needs renewal had been patched twice without fixing the entry point, and the stain kept coming back.

After

We followed the water to its source, repaired the stone-coated steel roofing at that point, checked the repair with a hose test, and photographed the finished work.

Maintenance: We recommend checking the repaired detail each spring, since heat and hail work on the same spots year after year.

Problems Stone-Coated Steel Solves in San Antonio

Stone-coated steel solves the tile problem, and the problems it solves are the ones a tile roof keeps having: the weight, the underlayment clock, and the hail that cracks the tile.

Problem

An HOA that requires a tile look

An HOA that requires a tile look usually names the profile and the colour, and the approval has to name the exact product before the tear-off starts.

Our Fix

We get the HOA approval in writing for the tile look, naming the exact product and colour, so the roof that goes on is the roof that was approved.

Problem

A house that cannot carry tile weight

A house that cannot carry tile weight cannot take concrete tile, which weighs 900 to 1,100 pounds per square, and the steel roof is the tile look at a fraction of the weight.

Our Fix

We check the structure before we quote, and the stone-coated steel roof is scoped from the structure, not from a general idea.

Problem

Tile underlayment that needs renewal

Tile underlayment that needs renewal is the most common tile roof failure, because the tile lasts 50 years or more and the underlayment gives up at 20 to 30.

Our Fix

We renew the tile underlayment that needs renewal and install the steel panels over it, so the roof keeps the tile look and gets a new waterproof layer underneath.

Problem

Hail cracking real tile

Hail cracking real tile is usually individual tiles, not the whole field, and the steel roof that replaces them takes the hail as dents, not cracks.

Our Fix

We replace the hail-cracked tile with stone-coated steel in the same profile, so the street keeps its tile look and the roof stops cracking.

Craftsman bungalow in Monte Vista

Why Homeowners Choose Stone-Coated Steel

It is the middle path: the tile profile the street expects, the steel performance the hail season demands, and a weight the house can carry. The trade is cost and a look that is close to tile, not tile itself. See real tile if the genuine article is what you want.

  • Tile profile, steel weight

    With stone-coated steel roofing, tile profile, steel weight is the difference between a roof that looks like tile and a roof that weighs like tile, because the panels are pressed into the profile and coated in stone granules.

  • Hail dents, not cracks

    Hail dents, not cracks is one of the reasons homeowners choose our stone-coated steel work, because a hailstone that would crack a clay tile dents a steel panel, and the panel keeps shedding water.

  • No underlayment clock like tile

    No underlayment clock like tile is built into the stone-coated steel roofing work, not added on top of it, because the steel roof does not carry a 20-to-30-year underlayment renewal with it.

  • HOA approval in writing first

    With stone-coated steel roofing, HOA approval in writing first is the difference between a roof that was approved and a roof that has to come off, because the approval names the exact product and colour.

What to Know Before You Hire a Roofer for Stone-Coated Steel Roofing in San Antonio

What to Check Before You Hire

  • Texas does not issue a statewide roofing licence; the City of San Antonio requires contractor registration for re-roof permits.
  • Stone-coated steel gives a tile or shake look at a lower weight than clay or concrete tile, which matters on older San Antonio homes.
  • The stone coating, the steel panel and the fastening pattern work together. A panel installed without its pattern is not the roof that was rated.
  • Steel sheds heat and hail differently from asphalt. Ask how the system is detailed at valleys, ridges and walls before judging it by the panel alone.
  • Kbron Roofing is at 6 Irongate Creek, San Antonio, TX 78238, open Monday to Saturday, 6 AM to 8 PM, closed Sunday. Call (254) 645-5833 during hours.

Google Reviews

Kbron Roofing holds 5.0 out of 5 from 18 Google reviews, all 5-star. Reviewers name Rene Vargas as their contact and describe honest, no-pressure service. Read short verbatim excerpts from those reviews in the Stone-Coated Steel Roofing testimonials below.

Stone-Coated Steel Experience You Can Check

We install stone-coated steel across San Antonio, from tile-look HOA streets to additions, and the approval is in writing before the tear-off starts. Call (254) 645-5833 during hours.

  • Tile-profile steel panels installed to the maker’s pattern
  • High-temperature underlayment and custom-formed metal flashing
  • City re-roof permit pulled on every replacement, as San Antonio requires
  • HOA approval naming the exact product and colour, in writing, before tear-off
  • 5.0 out of 5 from 18 Google reviews, all 5-star
Call (254) 645-5833
Roofing permit paperwork and house plan

What San Antonio Homeowners Say About Stone-Coated Steel Roofing

Short verbatim excerpts from Google reviews by customers who chose our stone-coated steel roofing work. All five readable reviewers gave 5 stars two months ago; three are quoted below.

"Rene is incredibly honest, hardworking, and dedicated to his customers. He takes the time to truly understand your needs and delivers quality work and results at a price that won't break your wallet."

J

Joe Favor

★★★★★ · Homeowner, San Antonio · 2 months ago · Roof inspection, roof installation, storm and wind repair

"He was so professional, walked me through the steps of how to make a claim with my insurance, and the whole process was super simple. The roof was installed in just one day, and the crew was incredibly clean and professional."

D

Donnovan Smith

★★★★★ · Homeowner, San Antonio · 2 months ago · Storm and wind repair, roof installation

"Rene took a genuine, zero-pressure approach. He is remarkably honest, transparent, and truly puts the customer's best interest first."

I

Imanii Roberson

★★★★★ · Homeowner, San Antonio · 2 months ago · Roof repair for storm and wind damage

Stone-Coated Steel Questions San Antonio Homeowners Ask

Real answers to the questions we hear most often about stone-coated steel in San Antonio, including whether an HOA will accept it.

What is stone-coated steel roofing?
Steel panels pressed into a tile profile and coated in stone granules, so the roof looks like tile and performs like metal. It weighs far less than real tile.
Will my HOA accept stone-coated steel?
Where the HOA requires a tile look, stone-coated steel is often the way to keep the profile. Get the approval in writing first, naming the exact product and colour, because approval for a tile look is not approval for any steel roof.
How does it handle hail?
Hail dents it rather than cracking it, like other steel roofs. The granule coating and the flashing still take hits, so the roof needs a spring check after hail season.
Do I need a permit for a stone-coated steel roof in San Antonio?
Yes. The City of San Antonio requires a re-roof permit on any replacement. Our permits and codes page explains the fee and the process.
How does it compare with real tile?
Real tile lasts 50 years or more but weighs 900 to 1,100 pounds per square and needs its underlayment renewed after 20 to 30 years. Stone-coated steel is lighter, takes hail better, and does not carry the same underlayment clock.

Get Your Stone-Coated Steel Roofing in San Antonio Scheduled

Call (254) 645-5833 and we will inspect the deck and the structure, photograph what we find, and give you a written scope. Monday to Saturday, 6 AM to 8 PM.

Call Now Call for an Estimate

Contact Kbron Roofing

Call us at (254) 645-5833 or send a message and we will get back to you during business hours. We schedule stone-coated steel work Monday to Saturday, 6 AM to 8 PM.

Or call us right now at (254) 645-5833 — we answer.

Kbron Roofing


  • Address

    6 Irongate Creek, San Antonio, TX 78238, United States, San Antonio, Texas

  • Hours

    Mon–Sat: 6 AM – 8 PM

Call (254) 645-5833 Get Quote
Call Quote